Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser makes use of cutting-edge technology to prevent car theft. The device is hidden by thieves and only turns on the engine when a PIN or app is entered.
It connects to the CAN data network in your vehicle and is weatherproof. It also comes with a service/valet mode, which allows you to temporarily start your car when it's in the garage for cleaning or servicing.
Easy to install
The Ghost immobiliser is a cutting-edge security gadget that shields your vehicle from cloning, hacking, and key theft. It is an PIN code system that is integrated into your car's electronic control unit, making it difficult for thieves to detect. It's not visible and does not use any sensors or special keys. It is also cheaper than replacing an ECU or installing a new key fob and could lower the cost of your monthly insurance.
Follow the instructions of the manufacturer when installing the Ghost 2 vehicle immobiliser. This will ensure the device works correctly and effectively. Once the installation is complete check the system by entering the PIN code, then turning on the engine. Regular testing will enable you to spot any issues early on.
Make sure you check the position of the CAN H and CAN L wires prior to beginning the installation. They are vital to powering the immobiliser, therefore it is crucial that they are properly connected. Labelling the wires can help you locate them during installation. Once you've identified the locations of these wires and connected them to a continuous 12V power source and a grounding point. Use a fuse tap to shield the connections against damage or short-circuits.
After connecting the wires, neaten the wires using cable ties to prevent tampering. It is also recommended to cover the connections with insulation tape or heat shrink tubing. This will shield the device from electrical shorts, and extend its lifespan. Once the wiring is secure, it's a good idea to test the Ghost 2 immobiliser.
The Ghost 2 immobiliser offers a service mode for situations where you may have to sell your vehicle for example, when it is being serviced or valet-parked. This disables the PIN sequence temporarily. Press the brake pedal and hold the accelerator down for a period of time equal to the number one in the emergency code. The system will then go into service mode, which can be confirmed by flashing the indication signal 5 times.
Easy to change PIN codes
It is easy to protect your vehicle from theft by installing the ghost 2 immobiliser. It is concealed within the vehicle and can be accessed by a unique code. The device communicates with the vehicle ECU using its data bus and does not rely on radio frequency signals, as alarm systems that are sold on the market or traditional Thatcham immobilisers do. This makes it harder for thieves to detect the sound of an immobiliser relay, or to add new keys. The control unit is concealed within the wiring harness or dashboard, and cannot be physically tampered with to reset the system.
The ghost 2 immobiliser is connected to your vehicle's CAN Data network. It uses buttons on the steering, door panels and the centre console to create a customisable series of up to twenty button presses, which must be entered to start the engine - similar as a PIN. This next-generation system doesn't require any cutting of wires when it is installed and is fully reprogrammable at any time. You can also put your vehicle in Service or Valet mode to allow it to be started temporarily when giving it to a mechanic for work.
You can also make use of the app to alter your PIN code or disable it completely if you've lost your keys. This feature is particularly helpful when you've given your car to someone else for parking or valet services. It will stop them from starting the car and then driving it off without your permission. It is also undetectable to professional thieves as it does not use any radio frequencies or circuit cuts.
The capability of the immobiliser to stop relay thefts is a great feature. Relay theft is a popular method of car theft where thieves hack into your car's diagnostic port, then modify the original signal that is sent by the key to the vehicle's ECU in order to trick it into believing that the key is valid. This is how traditional immobilisers can be bypassed, but with an immobiliser that is ghost 2, the signal is blocked before it can reach the ECU.
Simple to use app
Ghost 2 is a revolutionary immobiliser that protects your car from key-cloning, hacking, and key theft. It works by connecting to the CAN data network of your vehicle and requiring you to enter a PIN code before it can start the engine. It also prevents thieves using signal spoofing and device spoofing, which are both common methods of stealing vehicles.
The system is simple to use and works like a standard auto alarm. Installing the system will allow you to create a unique 20-digit pin code that needs to be entered before starting the vehicle. This will stop the vehicle from being stolen even if the keys are stolen. You can disable the system with an app for your smartphone.
Contrary to other systems it is completely silent and doesn't emit any radio frequency signals. It is a weatherproof, discrete device that can be positioned anywhere inside your vehicle. It can be concealed under the dash, steering wheel, or door panels. It communicates over the CAN data loop to your ECU and is not affected by diagnostic tools used by thieves to find security systems. It is also not affected by jamming devices that alter codes.
It is a security system that can be used to stop theft on all vehicles. Its technology has been proven to be effective, and it complies with TASSA Standards. The Ghost is a good choice for classic or sports automobiles. It can also be used as way to protect vehicles being rental on apps such as Turo.
The Autowatch Ghost 2 represents the next generation of car immobilisers. The system is completely inaccessible to thieves, and blocks them from starting your car without your PIN or unless they have been authorized by the app. It does not emit radio frequencies or any other signals that scanners can detect. The installation process is simple and quick. The app comes with a simple interface and simple navigation. It also comes with a GPS tracker that can assist police locate the vehicle and then recover it.
Easy to reset
Ghost 2 immobilisers are a great way to protect your car from being stolen. It integrates with your vehicle's ECU to create a barrier that thieves are unable to break through without a valid PIN. It's also TASSA-certified which means it is recognized by insurance companies. It's a great tool to deter theft of your car and could save you money in the end.
Unlike traditional alarm/immobilisers that require cutting circuits for circuit cutting, the Ghost system is connected directly to the vehicle's CAN network and operates with the existing buttons on the dashboard as well as the steering wheel. You can create a unique pin that is up to 20 presses in length. This PIN needs to be entered before your engine can begin, just like a PIN on your credit card. The Ghost system is inaccessible to thieves, and there are no LEDs to signal its presence. This makes it the most efficient aftermarket CAN-bus system available today.
ghost 2 immobiliser reviews of the Ghost system is that it doesn't use radio frequency signals, meaning it is not scannable or intercepted by thieves. This prevents the cloning of keys and relay attacks as well as the more common method of hacking a car's CAN bus system by looking for signals from its alarm/immobiliser. The Ghost system is designed so that it can be concealed inside your vehicle. There aren't any LEDs or other signals to indicate its presence.
The system also features the option of a Transport Mode that disables the Ghost system which is useful in situations in which you have to temporarily disable it, like during transportation or servicing. This mode isn't as effective as Service Mode as it doesn't disable the Ghost system when you exceed 31 mph within 15 minutes.
You will require the emergency code provided by your installer to reset your Ghost 2 immobiliser. It is typically hidden beneath a scratch-off area on the card supplied when you installed the device. This emergency code should be kept secure and stored in a secure location, such as an at-home wallet.